Plaza Stone

Perfect for walkways, patios, and pool decks.

Plaza Stone

A timeless paving stone with an impressionistic embossed surface profile the Plaza Stone series provides an array of pattern options. Available in many colors, choose Plaza Stone in standard or Heritage™ Series finish to deliver unlimited design possibilities. The 45mm and 60mm thicknesses are intended for non-vehicular traffic.

APPLICATIONS

General Road Construction • Parking Lots • Driveways • Patios • Bridge Underpasses • Entrance Areas • Flooring in Stables • Sidewalks • Terraces • Garden Pathways • Pool Decks • Pedestrian Malls • Roof Gardens

COMPOSITION AND MANUFACTURE

Plaza Stone is made from a "no slump" concrete mix. Made under extreme pressure and high frequency vibrations, Plaza Stone has a compressive strength greater than 8000psi, a water absorption maximum of 5% and will meet or exceed ASTM C-936 and freeze-thaw testing per Section 8 of ASTM C-67. Heritage™ Series may not comply with ASTM C-67 freeze-thaw durability.

INSTALLATION

  • 1. Excavate unsuitable, unstable or unconsolidated subgrade material and compact the area which has been cleared. Backfill and level with dense graded aggregate suitable for base material (typically 4 in. to 8 in. (101mm to 202mm) of compacted base for light vehicular and pedestrian traffic) or as otherwise directed by Site Engineer / Architect / Landscape Architect.
  • 2. Place bedding course of washed sand conforming to the grading requirements of ASTM C-33 to a uniform depth of 1-11/2in. (25-38mm) screeded to the grade and profile required.
  • 3. Install Plaza Stone with joints approximately 1/8in. (3mm).
  • 4. Where required, cut pave stones with an approved cutting device to fit accurately, neatly and without damaged edges.
  • 5. Tamp pave stones with a plate compactor, uniformly level, true to grade and free of movement.
  • 6. Spread sand to 1/8 in. (3mm) thickness over entire paving area. Heritage™Series may require joint sand stabilization.
  • 7. Make one more pass with plate compactor to fill joints with sand.
Details

Specifications and Pallet Information

PLAZA STONE 6X6 (45MM)

Available Colors: Buff Charcoal, Buff Dark Brown, Old Town Blend, Silvershell Blend

Nominal Dimensions: 5 7/6" x 5 7/16"

Height/Thickness: 45mm = 1 3/4" *

Sq. Ft./Pallet: 140

Pieces/Pallet: 672

Approx. Wt./Pallet: 2,746 lbs.

PLAZA STONE 6X9 (45MM)

Available Colors: Buff Charcoal, Buff Dark Brown, Old Town Blend, Silvershell Blend

Nominal Dimensions: 5 7/16" x 8 3/16"

Height/Thickness: 45mm = 1 3/4" *

Sq. Ft./Pallet: 133

Pieces/Pallet: 420

Approx. Wt./Pallet: 2,492 lbs.

PLAZA STONE I COMBO (60MM)

Available Colors: Charcoal, Buff Charcoal, Buff Dark Brown, Old Town Blend, Silvershell Blend

Nominal Dimensions: 5 7/16" x 5 7/16" & 5 7/16" x 8 3/16"

Height/Thickness: 60mm = 2 3/8" *

Sq. Ft./Pallet: 110

Pieces/Pallet: 420

Approx. Wt./Pallet: 3,080 lbs.

PLAZA STONE RECTANGLE ONLY (60MM)

Available Colors: Charcoal, Buff Charcoal, Buff Dark Brown, Old Town Blend, Silvershell Blend

Nominal Dimensions: 5 7/16" x 8 3/16"

Height/Thickness: 60mm = 2 3/8" *

Sq. Ft./Pallet: 95

Pieces/Pallet: 300

Approx. Wt./Pallet: 2,674 lbs.

* Fractional dimensions are nominal.

Calculator

Enter Your Address to Zoom In

INSTRUCTIONS

  • Find and zoom in on the desired address using the Search tool.
  • Left click on the map to start plotting points.
  • Continue clicking around the perimeter to add more points.
  • The Square Footage and Border of the area will be updated.
  • Adjust an area as needed by dragging its points.

Photo Gallery

More information on colors, sizes, and options are available at the Pavestone site.